PRODUCTS Shell Waterdetector GO BACK

Shell Waterdetector

The shell water detector is a device for determining the presence in jet fuels of finely dispersed undissolved water in concentrations lower than those normally detectable by visual examination. Water dispersions of this type can result from the emulsification of a water/fuel mixture during pumping, or from the precipitation of dissolved water due to a fall in fuel temperature.

The shell water detector should be used as follows to check samples
of jet fuels immediately after they are drawn:
a) Road vehicle and RTW drain samples - before discharge into airport
b) Bottom samples from airport tanks - immediately before release.
c) Fueller and trailer compartment drain samples - after each     replenishment.
d) Hydrant dispenser filter drain samples - after each replenishment.
e) Fuellers filter drain samples - after each aircraft fueling.
f) Drain samples from filtration equipment on hydrant delivery and    Refueller loading rock delivery.

[ Watch movie: Shell Waterdetector Capsules ]
Copyright © 2014 Milispec international b.v. All rights reserved.